How much does it cost to replace an electrical panel?

Most homeowners pay about $900–$2,200 to replace an electrical panel, averaging around $1,500 — a standard 200-amp upgrade typically lands $1,300–$2,000. Big service upgrades (new meter base, a 400-amp panel, rewiring) or high-cost metros can reach $4,000 or more. Labor, permits, and the meter/service work — not the panel hardware — are the biggest part of the cost.

How much is a 200-amp panel upgrade?

A 200-amp panel upgrade typically runs $1,300–$2,000. The price depends on whether the meter base and service mast also need work, your local permit fees, and the condition of the existing wiring; difficult installs or high-cost metros run higher.

Do I need a permit to replace an electrical panel?

Almost always yes — panel work requires a permit and inspection in most jurisdictions, and that cost is built into a licensed electrician's quote. Skipping the permit risks insurance and resale problems.

Should I upgrade to 200 amps?

Many older homes have 100-amp service, which can be tight for modern loads like EV chargers, heat pumps, and large appliances. Upgrading to 200 amps future-proofs the home, which is why it's the most common panel replacement.

Electrical panel replacement cost in Philadelphia

Electrical panel replacement in Philadelphia costs about $1,000 to $4,400 (typically $1,650) — local prices run about 10% above the national average.

These figures adjust our national electrical panel replacement range to Philadelphia's local cost level — see the method and sources below.

Low

$1,000

Typical

$1,650

High

$4,400

How we localized this

We start from our national electrical panel replacement range of $900–$4,000 and adjust it for Philadelphia, where costs run about 10% above the national average. Philadelphia home-improvement costs run above the U.S. average, in line with other older, dense Northeast metros. A cost-index comparison frames Philadelphia renovation pricing as about 22% above the national average, while the multiplier it actually applies to project estimates is 10% above — the figure we adopt. BLS data shows Philadelphia's wage growth pace trailing the national rate over the past year, which suggests the metro's labor-cost premium is a settled, already-priced-in level rather than one still climbing quickly. Materials are priced roughly nationally, so treat this as an approximation — your actual price depends on your home, contractor, and project specifics.

Philadelphia cost sources (2)

Philadelphia Home Improvement Costs (2026) — Cost to Renovate
Changing Compensation Costs in the Philadelphia Metropolitan Area — March 2026 — U.S. Bureau of Labor Statistics

Philadelphia's rowhouse-heavy housing stock creates renovation dynamics you won't find in most metros: shared party walls often require neighbor notification before structural work, and city-specific code knowledge matters more than usual. Philadelphia's Department of Licenses and Inspections (L&I) has a reputation for slow permit turnaround — 4–8 weeks for a routine kitchen or bathroom permit is common, so factor that into scheduling. The city's older housing stock (much of it built between the 1920s and 1950s) means lead paint and knob-and-tube wiring are frequent discoveries once walls open up; a 10–15% contingency is standard advice for any wall or ceiling work in a pre-1978 home.

Estimate your Philadelphia electrical panel replacement

Adjust for amperage and scope. The estimate starts from our published range.

Your area

Adjusts the estimate to local cost levels. Pick a metro or leave on national.

Service size

Scope of work

Access

Estimated cost for your options in Philadelphia

$1,000 – $4,400

Typical: $1,650

Adjusted for Philadelphia — costs there run about 10% above the national average.

How we got this

Starts from our published electrical panel replacement range of $900–$4,000, adjusted for:

Service size: 200-amp (standard upgrade)×1
Scope of work: Panel swap only×1
Access: Easy access×1
Area: Philadelphia×1.1

These figures are planning estimates compiled from public cost data on the dates shown — not quotes, bids, or guarantees. Real prices vary widely with your home, location, materials, permits, and contractor. Always get itemized written quotes from licensed local pros before budgeting or hiring.

What changes the price

Service amperage — Raises cost
Upgrading from 100 to 200 amps — or to 400 amps for a large home — raises cost.
Meter base / service mast — Raises cost
Replacing the meter base or service mast alongside the panel adds labor and utility coordination.
Permit & inspection — Raises cost
Panel work requires a permit and inspection in most areas, built into the quote.
Old or aluminum wiring — Raises cost
Bringing old or aluminum wiring up to code adds significant cost.
Panel brand — Varies
Some brands and smart panels cost more than standard ones.

Get real quotes for your Philadelphia electrical panel replacement

Our ranges are for planning. The only way to know your real price is itemized quotes from licensed local pros — always get at least three before you hire.

Tip: search for licensed, insured Philadelphia electrical panel replacement contractors in your area, check reviews and references, and compare written itemized bids — not just bottom-line numbers.

Electrical panel replacement cost — FAQ

How much does it cost to replace an electrical panel?: Most homeowners pay about $900–$2,200 to replace an electrical panel, averaging around $1,500 — a standard 200-amp upgrade typically lands $1,300–$2,000. Big service upgrades (new meter base, a 400-amp panel, rewiring) or high-cost metros can reach $4,000 or more. Labor, permits, and the meter/service work — not the panel hardware — are the biggest part of the cost.
How much is a 200-amp panel upgrade?: A 200-amp panel upgrade typically runs $1,300–$2,000. The price depends on whether the meter base and service mast also need work, your local permit fees, and the condition of the existing wiring; difficult installs or high-cost metros run higher.
Do I need a permit to replace an electrical panel?: Almost always yes — panel work requires a permit and inspection in most jurisdictions, and that cost is built into a licensed electrician's quote. Skipping the permit risks insurance and resale problems.
Should I upgrade to 200 amps?: Many older homes have 100-amp service, which can be tight for modern loads like EV chargers, heat pumps, and large appliances. Upgrading to 200 amps future-proofs the home, which is why it's the most common panel replacement.

Cost data compiled June 13, 2026.

Sources (2)

Cost To Replace Electrical Panel [2026 Data] — Angi
Cost To Replace Electrical Panel / Upgrade Breaker Box Amps [2026] — HomeGuide

Range synthesized from the editorially-independent cluster (Angi $518–$2,189, avg ~$1,344, with 200-amp upgrades $1,300–$2,000). Two contractor-blog sources that quoted $1,300–$3,000 were de-weighted as high-biased, not used as the anchor — they had inflated the earlier $2,200 average. Metro-level breakdowns are coming as we verify local data.

Compare other locations

See all Philadelphia electrical costs on the Philadelphia electrical page.

↑