Gas furnace replacement cost in Philadelphia
Gas furnace replacement in Philadelphia costs about $3,100 to $13,200 (typically $6,900) — local prices run about 10% above the national average.
These figures adjust our national gas furnace replacement range to Philadelphia's local cost level — see the method and sources below.
How we localized this
We start from our national gas furnace replacement range of $2,800–$12,000 and adjust it for Philadelphia, where costs run about 10% above the national average. Philadelphia home-improvement costs run above the U.S. average, in line with other older, dense Northeast metros. A cost-index comparison frames Philadelphia renovation pricing as about 22% above the national average, while the multiplier it actually applies to project estimates is 10% above — the figure we adopt. BLS data shows Philadelphia's wage growth pace trailing the national rate over the past year, which suggests the metro's labor-cost premium is a settled, already-priced-in level rather than one still climbing quickly. Materials are priced roughly nationally, so treat this as an approximation — your actual price depends on your home, contractor, and project specifics.
Philadelphia cost sources (2)
- Philadelphia Home Improvement Costs (2026) — Cost to Renovate
- Changing Compensation Costs in the Philadelphia Metropolitan Area — March 2026 — U.S. Bureau of Labor Statistics
Philadelphia's rowhouse-heavy housing stock creates renovation dynamics you won't find in most metros: shared party walls often require neighbor notification before structural work, and city-specific code knowledge matters more than usual. Philadelphia's Department of Licenses and Inspections (L&I) has a reputation for slow permit turnaround — 4–8 weeks for a routine kitchen or bathroom permit is common, so factor that into scheduling. The city's older housing stock (much of it built between the 1920s and 1950s) means lead paint and knob-and-tube wiring are frequent discoveries once walls open up; a 10–15% contingency is standard advice for any wall or ceiling work in a pre-1978 home.
Estimate your Philadelphia gas furnace replacement
Adjust for your furnace and install. The estimate starts from our published range and narrows for your choices.
Adjusts the estimate to local cost levels. Pick a metro or leave on national.
AFUE is the share of fuel turned into heat. Higher = lower bills, higher price.
How we got this
Starts from our published gas furnace replacement range of $2,800–$12,000, adjusted for:
- Efficiency (AFUE): Standard (80% AFUE)×1
- Furnace size: Average (60k–80k BTU · ~1,600–2,000 sq ft)×1
- Installation: Straight swap (same location)×1
- Area: Philadelphia×1.1
These figures are planning estimates compiled from public cost data on the dates shown — not quotes, bids, or guarantees. Real prices vary widely with your home, location, materials, permits, and contractor. Always get itemized written quotes from licensed local pros before budgeting or hiring.
What changes the price
Efficiency (AFUE) — Raises cost
96%+ AFUE units cost more and need different venting, but burn less gas.
Furnace size (BTU) — Raises cost
Bigger homes need higher heat output, which raises unit and labor cost.
Venting & gas line changes — Raises cost
Switching efficiency tiers or moving the unit can require new venting or gas work.
Brand & warranty — Raises cost
Premium brands and longer warranties cost more.
Rebates & tax credits — Lowers cost
High-efficiency furnaces may qualify for utility rebates or federal credits.
Get real quotes for your Philadelphia gas furnace replacement
Our ranges are for planning. The only way to know your real price is itemized quotes from licensed local pros — always get at least three before you hire.
Tip: search for licensed, insured Philadelphia gas furnace replacement contractors in your area, check reviews and references, and compare written itemized bids — not just bottom-line numbers.
Gas furnace replacement cost — FAQ
- How much does it cost to replace a gas furnace?
- Most homeowners pay $4,000–$10,000 installed, within a broader range of about $2,800 to $12,000. A typical 1,600–2,000 sq ft home lands around $4,500–$7,000 for a standard unit. Efficiency (AFUE), size, and installation complexity are the main drivers.
- Is a high-efficiency furnace worth the extra cost?
- A 96%+ AFUE furnace costs more upfront but burns less gas; the payback depends on your climate and gas prices, and is faster in cold regions. High-efficiency models also need different (sealed) venting, which adds to the install cost.
- How much is just the furnace unit?
- The furnace itself runs roughly $700–$6,200 depending on size, brand, and efficiency; high-efficiency units alone are about $2,800–$6,200. The rest of the project is labor, venting, and permits.
- Should I replace my furnace and AC at the same time?
- If both are old, replacing them together is common — you pay one labor mobilization and the components stay matched. If only one has failed and the other is newer, replacing just the failed unit is usually fine.
Cost data compiled June 13, 2026.
Sources (4)
- How Much Does a Gas Furnace Cost? (2026) — HomeGuide
- How Much Does a Gas Furnace Cost? [2026 Data] — Angi
- Furnace Replacement Cost 2026 — Fixr
- Furnace Replacement Cost 2026 — HVAC Project Cost
Ranges synthesize several public 2026 cost guides into a low–typical–high band rather than reproducing any single source's table. Metro-level breakdowns are coming as we verify local data.
Compare other locations
See all Philadelphia HVAC costs on the Philadelphia HVAC page.